Newmarket (Ontario, Canada) SELLER MANAGED Downsizing Online Auction - Holgate Circle

All items closed
Grid with imagesList view
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$35.00$1.00
$35.01$100.00$5.00
$100.01$1,000.00$10.00
$1,000.01$5,000.00$50.00
$5,000.01$10,000.00$100.00
$10,000.01$1,000,000,000.00$250.00

Stanley metal, 3 drawer tool box. 21 x 8 3/4 wide and 11 1/2 inches high. Full piano hinge on the back, 2 latches and pad lock holes. Drawers are locked unless the top lid is lifted. Anti slip mats in all levels. Top area: 10WR Vise Grips, Mastercraft multi screw driver - complete. Pliers 8 1/2 inches long, wires cutters 6 1/2 inches long, exacto knife - metal, not plastic with black rubber grips, small knife 5 3/4 inches long and Stanley Anti Vibe Premium hammer. Safety glasses, SAE ball end allen keys - longest is 9 inches, from 1/16 to 3/8 inch, 9x, Richards scraper 3 inches wide, bent needlenose pliers 7 3/4 inches long, scissors, pencil. Top drawer - 2 Quick Clamps 7 1/2 inches long and multi head rivet gun with 4 nose pieces for different rivet diameters. 2nd drawer - 12, 10, 8 and 6 inch adjustable pliers, 15 inch half round file, 7 1/2 inch triangular file, 9 3/4 inch round file. Multi wrench up to 3/8 inch at one end and up to 13/16 at the other end. 12 1/2 inch metal snips, 6 1/2 long cold chisel with 5/8 inch blade width, 9 inch torpedo level (made of wood!), bevel. 3rd Drawer - 25 foot, lever lock Stanley tape measure, 12 inch Irwin hack saw, 14 inch squire file with handle, 15 inch round file. Stanley Surform 296. The black handles were sanded, stained and varathaned. Wow ! 15 inch pry bar, T-55 Arrow staple gun. Pickup at Category B or C.

Used. One of the finer made puzzles. I have done more then 90% of them and they are complete. Pickup in Category A.

This is a metal Alltrade tool box. It has a full piano hinge in the back and the two drawers are locked closed unless the top lid is open. It is 19 1/2 inches long, 8 3/4 inches wide and 9 1/2 high. It has a COMPLETE Alltrade socket set in the molded top tray area. Only a couple of sockets were replaced. There are 1/4 and 3/8 inch sockets and the matching ratchets. For the 1/4 drive there are short height SAE sockets from 3/16 to 1/2 in 6 point and 12 point versions (16 in total). There are also short height metric sockets 5 to 9mm (9x). There are also long height sockets 5/16 to 7/16 (3x) and 8 to 11mm (4x). For the 3/8 drive there are short height 12 pt sockets from 7/16 to 3/4 (6x) and 7/16 to 13/16 (6x), 6 pt. There are also metric sockets 10 - 19mm, 12 pt, 8x and 11 - 19mm, 6 pt, 8x. There are long height sockets 7/16 - 9/16 (3x) and 12, 14mm (2x). There is a 5/8 spark plug socket, and a 2 inch extension for both the 1/4 and 3/8 drives. The 2nd drawer has a complete set of wrenches, a complete set of driver bits, ratchet screw driver and 4 hand tools per photos. In the 3rd drawer has a hack saw (2 blade positions, high torque clamp style), cold chisel (5 inches long), 2 inch C clamp, scissors, pencil, 13 foot tape measure, 9 inch torpedo level, safety glasses, 8 inch bastard file, 2 inch wide scraper, 10 inch claw hammer, Irwin "exacto" knife and 2 small hand clamps. Pickup at Category B or C.

This is a rolling scale for weighing goods. From Frenette & Frere of Montreal. With the weights included, it could weigh up to 500 pounds of goods. I weighed myself and it works fine. Cast iron frame, wood on the scale base and the upright, brass scale and cast iron counter weights. The weighing surface is 21 x 14 1/2 inches and is 7 1/2 inches off the ground. The base is 33 x 19 inches. The width including the overhanging weights to the right is about 26 inches. The height is 43 3/4 inches. You can remove the weights and lay it down on its side in your vehicle. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

This is a Dewalt 788 20 inch scroll saw and it includes the matching base, model 7880. The base has an adjustable back leg to raise the back up which some users prefer. It is 48 inches tall with 16 inch table width and the table is 23 1/2 inches long. The table can tilt left or right to 45 degrees. It is a variable speed machine, 400 - 1750 SPM, with the start/stop switch right on the top of the machine along with the variable speed control. It has a built in blower and a tool-less blade change and a ratcheting tension lever. The unit is mounted to a plywood base. It retails new for about $600. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

This is a large rear wheel rolling plastic tool box made by Zag. It has a long metal handle that slides out for pulling the box on the rear wheels. The wheels are 4 inch diameter ant 2 1/2 inches wide ! There are 4 hooks on the top to help secure the box while in transit or to lift the box to another floor in a building. It also has a top handle as well grips on the short sides to help lift the box up. The top of the box has two trays for storing parts or easily accessible tools. The lid comes off to feature a large red tray. This tray is 22 1/2 long 14 1/2 wide and 4 1/4 inches deep. Removing this tray, there is a gray tray underneath. This is 21 by 12 inches and has 10 black inserts to create separate bins which can be removed for storing longer items. Removing the gray tray gets to the lower part of the box. This box is 23 long and 15 inches wide at the top. It is 14 inches deep (excluding the height of the red tray and box lid. Pickup at Category B or C.

By bits and pieces, 1200 pieces, brand new in shrink wrap, 14 3/4" x 54". Pickup in Category A.

This pulley comes with an additional hook at the top. It is 13 inches in total length. The wood pulley is 5 1/2 inch diameter and is 1 3/4 wide. The metal frame was sanded down and painted in flat black rust paint. The pulley was sanded down, restained and varathaned (3x). An excellent show piece. Pickup at Category B or C.

Rock Maple wood. 50 inch length (with leaf) x 36 inch width x 30 inch height. 40 inch length without leaf. Minor dents on table top but otherwise in excellent condition. Minor scratches/dents on seats as shown in photos. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

Used. I have done more then 90% of them and they are complete. Pickup in Category A.

4 horned type wooden hand planes. They have all been cleaned up, restained and varathaned (3x). The bottom was not varathaned but is stained. Same where the blade locks into the body. The first detailed photos are from a plane from Hamburg, Germany. It is 8 1/2 inches long, 2 1/2 inches wide with a 1 7/8 inch wide blade. See photos for details. The 2nd detailed photos is from a George Ott plane from Ulm, Germany. It is 9 1/2 inches long, 2 1/2 wide with a 1 7/8 inch wide blade. The 3rd plane is for shaping curves. It is from Erik-Anton-Berg from Eskiltuna, Sweden. It is 9 inches long, 2 9/16 wide with a 2 inch wide blade. See photos of the markings on the blade and chip breaker. The small plane is 7 1/8 inches long, 1 9/16 wide with a 1 1/8 wide blade. The only marking on the blade is G.B.N. The plane does not have a separate chip breaker attached to the blade like the other three. All can still be used or could make a nice display. Pickup at Category B or C.

Metal tool box. Upper drawers have covers and contain areas for sockets. It has two latches plus a locking hole. It is 18 inches long, 10 inches wide and 13 inches high (excluding the handle). Full metal piano hinge on each side. Pickup at Category B or C.

Corsair #5 Jack Plane and a standard angle block plane. Corsair is made in the USA. It is 14 inches long with a 2 inch wide blade. Blade is freshly sharpened and wood has been restained and varathaned (3x). Block plane does not have a company name on it. Knob is hard rubber, blade is sharp. It is just under 7 inches long with a 1 5/8 inch wide blade. Pickup at Category B or C.

This is a model 3400 Beaver Lathe manufactured in Guelph, Ontario. Beaver was founded in 1916 and started building woodworking tools just after WWII. It was purchased by Rockwell MFG in 1953 so it's name changed to Rockwell Mfg Co of Canada around 1955 as reflect on the emblem on the headstock. This name didn't change again until about 1972. This assembly is mounted onto a heavy wood sled and has the motor neatly designed as a cantilever to control belt tension. The sled is 57 inches long, 14 1/2 inches wide with the motor tipped in. There are holes drilled on the back side to hold tools. Including the cross members, the sled is 3 1/4 inches thick. There is space just in front of the head without a bed to spin larger size items. Distance is about 7 1/2 inches so you could spin something starting near 15 inch diameter. There is also spindle on the backside that could be used for turning. The bed reduces the turning size to about 11 inches. The bed is 38 inches long. The unit is 48 inches long excluding the motor. The tool rest is 10 inches long. The motor is a 1/3 HP, 110V from Leland Electric of Toronto. The drive belt is new and the lathe runs well. There is also a separate faceplate as shown in the photos. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

Punched into the side of the can on one side is "City Dry Ltd Toronto". Pickup in Category A.

Eleven pieces of balsa wood. Ideal for carving. Sizes, one of each: 14 inch x 3 inch x 25 inches, 9" x 3" x 21 1/2", 9 1/4" x 3" x 21", 7 1/2" x 2 3/4" x 19", 8" x 2 3/4" x 19", 9 1/4" x 2 3/4" x 19", 6 1/4" x 2" x 12", 7 1/4" x 2" x 14 3/4", 7 1/4" x 4" x 14", 4 1/2" x 4 1/2" x 12", 6 1/2" x 4 1/2" x 12 3/4". Pickup at Category B or C.

Husky 26 Gallon air compressor. 1.7 running HP. Portable, oil free design, 110V. Can stand vertical and horizontal. Unique. 47 inches long (or height). Cylinder is 40 inches long, 15 inch diameter, 150 PSI max. Good running order. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

A cabinetmaker's wood clamp, a 7 inch wide, 18 inch long F Clamp and a 5 inch wide, 12 inch long F clamp. Pickup at Category B or C. The wood clamp is 18 long and made of wood clamps over 2 inches thick and over 2 1/2 inches wide. These are very versatile clamps allowing them to clamp a long length and at various angles. The maximum opening width is 14 inches. It is made by The Cincinnati Tool Company, USA. From the tip to the top of the first metal rod is 9 inches but you can clamp along the edge all the way to 18 inches. The wood clamps have been sanded and stained. The handles have been sanded, stained and varathaned. The Cincinnati Tool Company started in 1887 and was sold in 1955. The small F clamp is made by Richa which is from West Germany. It can clamp items up to 12 inches thick and out about 5 inches from the edge. The bar is 1 3/16 inch wide and 5/16 inch thick. Handle has been sanded, stained and varathaned. The larger F clamp is from the Wetzler Clamp Company Inc of Long Island City, NY, founded in 1928. It can clamp up to 18 inches and over 7 inches from the edge. You can never have enough clamps, especially like these.

Four QTG hand clamps, two "F" clamps and a strap clamp. Two 2.5 x 24 inch QTG hand clamps, one 2.5 x 12 inch hand clamp and one 2.5 x 6 inch hand clamp. One Wolfcraft band clamp for clamping add shaped projects. Two 100 x 600 mm (4 x 24 inch) "F" clamps. Bar is 1 1/8 inch wide and almost 1/4 inch thick. Pickup at Category B or C.

Beaver-Delta bench top drill press. Model 11-951. 8 inch drill press (so 4 inch distance from the front of the back support to the centre of the drill). 5 speeds - 620 to 3100 RPM. 5.4 Amp motor, runs at 1720 RPM, 120V. Table tilts 45 degrees in both directions. Table is 6.5 by 6.5 inches. In has a 1/2 inch chuck, including chuck key. Machine is 23 3/4 inches tall, 16 3/4 inches deep and 7 inches wide. No rust. Works fine. Pickup at Category B or C.

Bostitch 4.5 gallon, oil free compressor. Builders Series, CWH100. 125 PSI Max, 10 AMPs. Has Cold Weather Start, sturdy top handle, 6 foot cord and all 4 rubber feet. Some minor surface rust. It works fine. Pumps up to max PSI, shuts off and holds its pressure! Has a blow off valve and wing nut drain plug. Pickup at Category B or C.

"Cordless" drills. Been around for a very long time. A "Flott" ratchet brace made in West Germany. 5 inch arm swing (10 inch diameter circle that your arm rotates to turn the bit). Handle and top knob sanded, stained and varathaned. Miller Falls, USA, No 142 brace, also 5 inch swing. Non-ratchet design. Five bits. Square shank to fit both braces. Number 7, 10, 11, 12 and 14. The number refers to the number of sixteenths the diameter is. So "7" would be 7 x 1/16 = 7/16 inch diameter. 14 x 1/16 = 14/16 = 7/8 inch diameter. Pickup at Category B or C.

Used, Hallmark cards long time manufacturer of puzzles. I have done more then 90% of them and they are complete. Coke cola. Pickup in Category A.

Excellent condition, many first editions. Pickup in Category A.

From the 50's 60's 70's most in good condition. Pickup in Category A.

This is a real vintage torch that has been all cleaned up. The torch is about 8 1/2 inches tall and about 7 1/2 inches wide. The brass base has been all cleaned up along with the top area parts as well as the torch head. The handle has been cleaned, restained and varathaned (3x). A great show piece. Pickup at Category B or C.

This is a Model 3400 Beaver brand wood lathe with a welded on extension bed mounted to a thick wood sled. Made in Guelph, Ontario. It has no motor. See item 36 as this is the same model. The length of the wood sled that it is mounted on is 86 inches. There are two cross pieces underneath making the width about 14 1/2 inches. The tool rest is custom made and mounts on two tool holders. It is 52 1/2 inches long. The bed of the lathe is 69 inches long excluding the 4 inch gap near the head stock. There is a hole in the wood sled under the head stock for the pulley to mount to a motor under the sled. Similar to item 36, there is a port on the backside of the head to mount the motor behind the head on the same level as the lathe. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

Princess Charles, Diana Princess of Wales, Queen Mother, George. Pickup in Category A.

Most in good condition. Pickup in Category A.

This is a small metal tool box with most of the tools that people need. It is 16 inches long, 6 inches wide and 6 1/2 inches high. It has a full metal hinge on the back and a good latch. The top tray contains a 9 inch torpedo level, 3 files (up to 10 inches long), a Fuller No5 multi-screwdriver, metric/SAE allen keys, a Challenger Canada cold chisel, 6 inches long, 1/2 inch wide blade. It also has a 12 foot metric/SAE tape measure. See photos of some other items. The bottom of the box has two 2 inch Irwin C clamps, Mastercraft CrV tin snips, 8 inch adjustable wrench, Kraeuter USA pliers/cutter, Mastercraft adjustable pliers, Richards 2 inch scraper, Duramax hammer (11 1/2 inches long) and a 8 - 12 inch hack saw. See photos. Pickup at Category B or C.

Eight pound maul ax and 15 inch hatchet. Heads are secure on both and both handles have been sanded, restained and varathaned (3x). Both blades have been sharpened and any rust removed. The maul is on a 33 inch straight handle, a metal wedge was added to lock the head on tightly. The blade is 3 3/4 inches long. The hatchet has a 5 1/2 inch long head with a 3 1/4 inch blade. Appears to be made in China with "HK" stamped on it, likely for Hong Kong. Pickup at Category B or C.

Ridgid brand manual pipe threader, 111-R, including a 1/2 inch cutter head. 22 1/2 inches long. Die head snaps in from both sides and locks in place. Designed for threading pipe or conduit. Pickup at Category B or C.

Beacon brand oil lamp. Made in Canada. "Guaranteed Wind Proof". 15 3/4 inches tall excluding handle. Pickup at Category B or C.

Ridgid 12V impact driver and oscillating tool. Lithium Power Tool 12V drill driver. One Ridgid battery and one Lithium Power Tool battery and a chargers for both. Both batteries work. Ridgid tools come in a soft side case. The Ridgid impact driver has a locking hex head for standard driver bits. It also has a built in work light. The Ridgid oscillating tool is actually a multi tool head that can have other heads attached to it. There is a scraper blade, allen key and adapter for the head to allow it to use cutters from other brands. The oscillating tool can have triangular sander pads, grinder blades, scrapers and various cut off tools attached to it. Other heads such as right angle drills and jig saw heads are available. The Lithium Power Tool 12V drill also has a work light and 15 torque settings and a max speed of 400 RPM. Both drills are variable speed and have a reverse setting. Pickup at Category B or C.

This is a Skil 190 Surfboard planar. Motor works fine. New 10 foot cord has been put on. Two blades. Side fence is adjustable and can be removed. There is a 90 degree guide included in the box to help set the fence. The dust port can be pulled off to switch the dust direction. The planar has its own custom metal toolbox with a cushioned inner support and mounts in the top to fit over the motor housing. Fence can be left on when it is put in the box. The planar is 17 7/8 inches long with 2x 3 inch wide blades. There is an Allen key in the box to change the blades. The box is 19 1/2 inches long, 8 1/4 wide and 9 3/4 inches high (excluding to top handle). Pickup at Category B or C.

This is a Model 200 Sport Lite Lantern from Coleman along with the original box. It is about 12 inches tall. 19 inches to the top of the handle. It runs on naphtha gas. In excellent condition to use or display. Pickup at Category B or C.

Sears Craftsman, twin cylinder, 230V air compressor. 17 gallon tank, 7.7 cu ft/min at 90 PSI, 125 max PSI. The unit requires oil which typically last longer than the oil free machines. It is a 230V machine although the plug looks like 110V. It has a Leeson, 2hp motor, made in Wisconsin and a DeVilbiss tank spec'd to 150 PSI and 350F max. There is a separate small plastic cover over the belt and a larger cover over the rest of the hardware which was removed for better photos. It has two big wheels in the back and a strap in the front making it tricky to move. A metal arm in the front would be better. Works fine. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

Brand new in shrink wrap, 769 pieces. Pickup in Category A.

I think they are called country harvest bowls, no chips, used. Pickup in Category A.

Electric Skil jig saw, Black & Decker drill and Ryobi grinder. Skil jig saw is a small 3.2 Amp, model 4230, works. B&D drill is old but works fine. Model 7104-04 Type 2, 2 Amp, 3/8 inch max opening, 1200 RPM, Made in Canada. Ryobi grinder is model AG402, 4.5 inch grinder, 4.4 Amp, 11K RPM, works fine. All cords are in good shape. Pickup at Category B or C.

This is an original carpenters tool tray. It has been sanded, restained and varathaned (3x) to make a beautiful display item. The vertical support at one end is to hold his saws while in the tray. It is 25 long x 10 1/4 wide x 3 1/2 inches to the top of the box and 7 inches to the top of the handle. Pickup at Category B or C.

Both sets are complete ! It also includes a 3/8 - 13/16 Supa wrench. The metal red box set is 12 1/2 inches long, 6 1/2 inches wide, 40 pcs in total. It has 1/4 and 3/8 sockets, metric and SAE. 1/4 inch set: 3/16 to 1/2 inch (9x) and 4.5 to 12mm (9x). 3/8 inch set: 3/8 to 3/4 inch (7x) and 9 to 19mm (9x). It also has a 13/16 inch spark plug socket, 1/4 - 3/8 adapter, 3 inch extension (3/8 size). The ratchet is a 3/8 inch size and there is a 1/4 inch driver. The gray box has a 1/4 inch driver, 26 driver bits, a 2 inch extension, 1/4 inch drive adapter. There are Torx, Slot, Robertson, Phillips and Hex driver bits. The driver itself has storage in its top for bits. Pickup at Category B or C.

Good to excellent condition, make something with all the wooding working tools you can buy. Pickup in Category A.

This is an antique blow torch. It is about 8 1/2 inches tall and 7 1/2 inches wide. It looks like the adjustment knob on the back was replaced with a wooden version. There is also a cover that goes over the centre area of the torch as seen in the photos. This tool has been all cleaned up. The brass bell has been polished up along with the torch head and the wooden knob and handle have been sanded, restained and varathaned (3x). It is an excellent item for display. Pickup at Category B or C.

Sears 1 1/2 ton hydraulic floor jack and two 3 ton capacity jack stands from Allied Automotive. Floor jack goes from 5 to 14 1/2 inch height. Jack stands are ratchet type going from 12 to 17 inch height. See photos of box for other details. Pickup at Category B or C.

New in box 1000m/10000m field 7.2 with day night vision. Pickup in Category A.

Good to excellent condition. Pickup in Category A.

This antique pulley has a metal frame with swivel eye at the top and wooden pulley. It has be carefully cleaned up with the metal repainted with flat black rust paint. The wood pulley has been sanded, restained and varathaned (3x). The total height is 12 inches. The pulley is 6 inch diameter and 1 3/4 inches wide. A great item to display. Pickup at Category B or C.

This is a Crescent WFS No 129 metal oil lamp. Dietz Fitzall glass. It has been cleaned up and repainted but there is some rust holes on side arms as well as near the bottom. The hole in the bottom will cause the oil to leak out. Perhaps some epoxy could address that. Regardless, it is a nice looking lantern for display. Pickup at Category B or C.

This is a Gray metric and SAE socket set (25 sockets). Gray is made in Canada ! There are 11 metric sockets: 10, 11, 14,20, 22, 23, 24, 25, 26, 29 and 30. All are Gray except for 14mm which is from Proto (from Canada) and 25mm from KAL (Japan). There are 14 SAE sockets: 3/8, 7/16, 1/2, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 1, 1 1/16. The big sockets are Gray. 3/4, 7/16 from Husky, 11/16 & 1/2 unknown, 3/8 from Proto (Canada). The socket is 9 inches from centre of head to end of handle. There is a 14 inch adjustable hand driver, 10, 6 and 5 inch extensions, a 1/2 - 1/2 universal joint and a 1/2 - 3/8 adapter. The sockets a secured to 2 holder strips. Pickup at Category B or C.

Metric and SAE wrenches in a nice Herbrand metal, latching box with "all round" non-slip mat. Complete driver bit set in sturdy plastic latching container. The metric wrenches go from 6mm up to 18mm with a double ended wrench with 19/17 combination (14x in total). The SAE wrenches start with a double ended (DE) wrench of 5/32 over 3/16, 1/4, DE 5/16 over 13/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, DE 13/16 over 7/8 and 7/8 inches (12x wrenches in total). The driver set has 18 1/4 inch sockets, 1/4 extension, driver and 29 driver bits as indicated in the labels in the tray. A complete set. Pickup at Category B or C.

This is a very nice Beacon oil lantern, flat black colouring. These were made in Canada. It is a "Guaranteed Wind Proof" light. GSW Quality. The wick still moves up/down and will still help campers see their way in the dark. Very good condition. Pickup at Category B or C.

I, II, III. Pickup in Category A.

Good to excellent condition. Pickup in Category A.

This is a wood barrel used to transport soda ash from Wyandotte, Michigan to the Pittsburgh Plate Glass Company (PPG Industries today). It was part of industrialist J.B. Ford's companies in the early 1900's. It is 14 inches in diameter and 23 inches tall. The lid has a small ring on a string to help pull off the top cover. Pickup at Category B or C.

About 16 1/2 inches tall. Has "Queen Mary" on the wick cover. No damage to any of the glass. Pickup at Category B or C.

A complete 60 piece Mastercraft tap & die set including die tool, tap handle and thread gauges. All the parts have been confirmed. Only a few parts have ever been used. Clear plastic cover still on it. Also, 16 additional taps. 9 are from Butterfield of Rock Island, Quebec. 7/8 NC 9, two 3/4 NF 16, 5/8 NC xx, two 9/16 NF 18, 17/32 x 12 and 1/4 NPT 18. A small 6 piece tap set with tap wrench.... 6 NC 32, 8 NC 32, 10 NF 32, 3/16 NC 24 and 1/4 NC 20. Three other small taps... 10 NF 32 and two 1/4 NC 20's. Pickup at Category B or C.

Ficus is about 7.5 feet tall. Giraffe is about 6.5 feet tall. The neck separates from the body for easier transport. Pickup at Category B or C.

Brand new in shrink wrap 751 pieces, classic coupe hot rod, makes 2 cars, pieces are reversible, 24 x 9x 9. Pickup in Category A.

This is a vintage manual air pump. The base is cast iron as is the upper housing and the pumping arms. The main housing is made out of brass as is the output piping. The handle is made of wood that was sanded, restained and varathaned. All the cast iron was sand and paint in rust paint. It is 13 inches high with the arm down and 12 inches wide with the arm down. A beautiful decor item to display. Pickup at Category B or C.

Drill Doctor XP sharpener. Includes DVD for instructions. Can also get detailed instructions at www.drilldoctor.com for this unit. Sharpens bits from 3/32 to 1/2 inch twist bits and masonry bits. You can also buy a separate chuck to sharpen bits up to 3/4 inch. It also has the capability of split point sharpening which provides better self centering on tempered steel, hard alloys and hard cast materials. It has a 180 grit sharpening wheel and it sharpens in the same way as when the bits were originally manufactured. Has all the parts. Ready to use. Pickup at Category B or C.

All Snap On brand tools/parts. Snap on side cutters. Wrenches - 5/16, 11/32, 3/8, 3/8 inch. 9/16, 11/16 and combo 3/8-7/16 inch. 10 and 11mm. 1/2 inch sockets: 24 point - 15/16, 7/16W, 19/32, 1/2 and 7/16. 6 point - 11/16, 7/16, 17mm and 13mm (tall one). 3/8 inch sockets - 24 pt - 16mm (tall), 15mm (short), 3/8, 10mm. 6 pt - 9/16, 14mm, 1 inch 3/8 to 3/8 extension. 1/4 inch sockets - 8 pt - 5/16. 2x 1/4 to 1/4 extensions, 2x less than 1/4 to 1/4 extension. 6 pt - 1/4 (dark color), 11/32 (dark colour), 3/8 (tall), 6mm (tall), 7/16 inch. Pickup at Category B or C.

2 x 25 litre, 2 x 5 litre. Pickup in Category A.

Brand new in shrink wrap, 1077 pieces, completed siz 19 x 19 x 15. Pickup in Category A.

Promotional car new. Pickup in Category A.

This Record vise is made in England. It has 4 inch wide jaws. Maximum opening is about 4 5/8 inches. High quality grey iron casting. Hardened steel replaceable jaw inserts. Inserts were not tight (at some point) and hammering on the vise cause damage under the jaw as photo indicates on the inside jaw. Will have no impact on its performance. This is a fixed base design. Pickup at Category B or C.

The first two photos show the entire lot. There are 2 new gray infrared wall switches including 2 new cover plates. 0-800W @ 120VAC. Next, there are 50 (2x25) boxes of weather resister light sockets. See Leviton note with details. 600W, 250V AC/CA. There are 5 new porcelain lamp holders, white, 660W/250V. P/Ns 49875 (2x), 9875 (2x) and 9854 (1x). There are cover plates (4x), light switches (2x) and electrical outlets. There is also a new wheelchair door opener button. There are 3 medical wall outlets as well as a rotary dimmer switch. There are 9 new MR16 (GU5.3), 50W light bulbs. Pickup at Category B or C.

Used condition. Pickup in Category A.

1867 to 1970 commemorative medallions from shell gas stations from the 70's. Pickup in Category A.

Around 104 in good condition. Pickup in Category A.

Around 60 in good condition. Pickup in Category A.

Used, works. Pickup in Category A.

Double scissor car jack, lug wrenches, battery charger, car tire compressor, fluorescent work light, car brush, jumper cables. Double scissor jack raises to almost 20 inches, made in Canada. 5 inch height when lowered. Lug wrenches are for 2 different bolt sizes. Superflex copper cable in the jumper cables, 12 feet long. Fluorescent work light works, 12V by 12V adapter or direct to the battery, 18 ft cord. 2 AMP Motormaster battery charger. Pickup at Category B or C.

Elora is made in West Germany. This is a metric, 12 pt, 1/2 inch socket set in a case. There are 20 sockets from 10 - 32mm, a universal joint, 5 inch and 10 inch extension, manual crank arm and manual/adjustable driver. The ratchet is 10 inches long. The case is metal 17 1/2 inches long, 7 1/2 inches wide and 2 inches tall. It has 2 metal hinges on the back on 2 working latches at the front. Most of the sockets are from Elora except for 21mm which was replaced with a Gray 13/16, 18mm replaced with 11/16 and 16mm replaced with a 5/8. The ratchet is Gedore, No 1993U, made in West Germany. The 3 largest sizes are 27, 30 and 32. Pickup at Category B or C.

mark cullen, readers digest, better homes and gardens. Pickup in Category A.

Good to excellent condition. Pickup in Category A.

2 mickey mouse walt Disney, lamb, heart ( this one has some gum or something on it, I will let you remove it ). Pickup in Category A.

Cast iron, stove pipe collars. Manufactured by James Smart MFG Co. Ltd from Brockville, Ontario. Paint/rust removed and painted with flat, black rust paint. Both are identical. No cracks in the castings. 15 1/4 inch diameter with room for a 7 inch pipe. Use them in your cottage or display them. Pickup at Category B or C.

A vintage counter top scale from the Canadian Toledo Scale Company, Windsor Ont. Model 9670. 18 lbs maximum weight. Still works. Needs to be adjusted to zero. Tray is white porcelain, base is cast iron. It is 21 inches high, 21 inches deep and 17 inches wide. There is damage to the front bezel as indicated in the photos. The magnifying glass is intact. The balance bubble in the front centre below the Toledo label is gone. Weighs about 50 pounds. Since this is an owner run Maxsold event, we can help you load it. Pickup at Category B or C.

King 3/8 inch drill, Skill 2.0 AMP 1/4 sheet sander and King Performance Plus circular saw with laser. Drill is 3.3 AMP with keyless chuck, variable speed up to 2700 RPM and reverse up to same speed. Mint condition. Model 8302, includes full manual. The Skill 1/4 sheet sander, model 7290, is a 2.0 AMP, single speed model with a built in dust filter and 13000/min. The circular saw uses a standard 7 1/4 blade, model 8307L, 10 AMP, 4500 RPM. It tilts 45 degrees and can tip up to reduce the depth of the blade in the work. Full manual included and laser guide works. All tools work properly. Pickup at Category B or C.

B&D 5703 Deluxe Jig Saw. Relatively small, light jig saw (7 1/2 inches long), 2.5 Amps, 3000 strokes per minute, made in Canada. Works fine. Wolf Sapphire 8012 hammer drill. Made in England. Has 4 levels of hammer drilling capability. 3.35 Amps, 3/8 inch chuck, 1000 RPM, 14 1/2 inches long. Solid. Works well. The secondary handle that fits on either side of the head was broken but the bolt that threads into drill is included to help find a replacement. Weller 8200 two power soldering gun. Has two soldering tips, some soldering wire and a good case. Works well. Pickup at Category B or C.

All metal knife and sheath. About 12 1/2 inches long. Excellent condition. Pickup at Category B or C.

Good to excellent condition. Pickup in Category A.

Used condition. Pickup in Category A.

Around 90 in good condition. Pickup in Category A.

3 disc set, working. Pickup in Category A.

What is life apple scruffs George Harrison, all those years ago writing's on the wall, it's so hard john imagine Lennon. Pickup in Category A.

Skil reciprocating saw and Skil electric drill. The drill is a Skil Xtra Tool 599. It has a clutch to engage a hammer feature but this only works in chisel mode. It has forward/reverse and an adjustment wheel to control the maximum speed. It has a removable side handle, 3/8 inch chuck with chuck key. The reciprocating saw is a Model 474. In comes in custom made metal box with lots of room to store the cord, extra blades etc, unlike the plastic ones that have no room for anything else. It has 5 used reciprocating blades included. You can adjust the head to fit the blade in 4 different ways. The foot is partially broken but the tool still works fine (see photo). It has an 8 foot cord. The unit is 16 inches long. Pickup at Category B or C.

Complete 3141 pieces with color roof tops and color instruction guide. completed size 35" x 26" x 21". Pickup in Category A.

Many interesting information about birds and bird watching, 1 vhs tape. Pickup in Category A.

No plastics cases, yield, ac/dc, Nazareth, gorillaz, nellyville, kravitz, blue brothers, pretenders, collective soul, Kevin Rudolf, matrix, Coldplay, creed, ccr, pete Townsend, the stills, prodigy, 54 40,slipknot third eye blind, seether. Pickup in Category A.

Chesapeake bay saga. Pickup in Category A.

New key trilogy. Pickup in Category A.

Garden trilogy. Pickup in Category A.

Mithra series . Pickup in Category A.

Guardians trilogy. Pickup in Category A.

Three Disney comics: The Beagle Boys (1975), Uncle Scrooge (1954) and Pluto (1974). Five Richie Rich comics, 1973, 1974 (2x), 1975 (2x). Pickup at Category B or C.

University type nursing books. Some are quite thick. Pickup at Category B or C.

Untested, no 8 track player, I don't see any problems with them. Pickup in Category A.

From 1982 promotional aquafresh tooth paste. Pickup in Category A.


Please wait...