Wellington (Ohio, USA) SELLER MANAGED Downsizing Online Auction - Barker Street

All items closed
Grid with imagesList view
Grid with imagesList view
You can enter a new max bid at any time by entering a bid greater than your current high bid.
A max bid would make it more difficult for others to outbid you.

A max bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your max bid amount) in order to maintain your lead position.

To get a max bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a max bid unless another bidder has a max bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your max bid amount.

Your max bid amount is kept confidential from other bidders.

You can lower or delete a max bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using max bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a max bid.

You can raise or lower your max bid at any time by entering a new amount.

If you wish to remove your max bid you can do so by entering an amount equal to the current bid into the bid form.

You have a max bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this max bid by using the form above.

If you want to remove your max bid click here.
You can add a max bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$35.00$1.00
$35.01$100.00$5.00
$100.01$1,000.00$10.00
$1,000.01$5,000.00$50.00
$5,000.01$10,000.00$100.00
$10,000.01$1,000,000,000.00$250.00

Model 28-245 Delta 14" band saw, serial number 92C17688 on steel stand. Includes some blades; some bands need welding. Saw with stand measures 36Wx19Dx65H overall. In working condition; table shows some rust. Unit is very heavy. Located in outdoor shed. Come to pickup at Category C time-slot. Appropriate vehicle and help to carry is required.

Performax S/T 24" power drum sander, model 634G01 has adjustable rolling stand and variable speed. Measures 44Wx36Dx60H inches overall. In used working condition. Located in outdoor shed. Come to pickup at Category C time-slot with appropriate vehicle and help to carry.

12" Belsaw wood planer, model 9103, on rolling frame - 220 volt. Measures 45Wx30Dx43H inches overall. In working condition. Two adjustable long stock stands seen are included. Located in out door shed. Unit is very heavy. Come to pickup at Category C time-slot. Appropriate vehicle and extra help to load is required.

Porter Cable model 738, variable speed Tiger saw, serial no. 10962 A7994 with carry case and extra blades; 120V AC. In good used working condition. Includes Makita cordless drill, model 6095D with carry case. Missing battery pack, untested. Located in outdoor shed. Come to pickup at Category B time-slot.

Includes five axes, one hatchet, crow bar, three pry bars and four wedges. All in fair to good used condition showing some rusting and worn handles. Come to pickup at Category B time-slot with help to carry.

Antique hand tools including draw knives, plane, reamer bits, drill brace, chisels, glass cutter etc. Come to pickup at Category A time-slot with a box to carry.

Includes one foundation jack, one scissor jack, one bottle jack and one antique log roller. All in working condition. Come to pickup at Category B time-slot.

AMT Dust Collector and cart, model 4710 15690 with induction motor by American Machine and Tool Company, Inc. In good used working condition. Come to pickup at Category C time-slot with appropriate vehicle and help to load.

Includes three height-adjustable roller stands for long stock off a saw; two have rolling wheels 33" and 13" respectively; third one is missing the roller but measures 16". Heights are adjustable but approximately 36" high. Located in outdoor shed. Come to pickup at Category B time-slot with help to carry.

Homecraft 10" depth band saw made by Delta. Mounted on cast iron base and has attached work light with assorted blades; some blades need welding. Measures 20Wx12Dx60H with stand. In working condition, but electrical cord needs repair and rust seen on table and stand. Unit is very heavy. Come to pickup at Category C time-slot. Appropriate vehicle and extra help to carry is required.

Delta 16-1/2" drill press, model 77-900, has 3/4 HP motor and measures 18Wx32Dx68H inches overall. In good working condition; one spindle handle is loose. Includes drill bits and two clamp down vices. Unit is very heavy. Come to pickup at Category C time-slot. Appropriate vehicle and extra help to load is required.

Craftsman 1/3 HP industrial rated grinder mounted on cast iron pedestal. Has ball bearing split phase motor, mounted work light and takes 5" grinding disks. Measures 14Wx9Dx38H overall with stand. In working condition. Unit is very heavy. Come to pickup at Category C time-slot. Extra help to carry is required.

Sears Craftsman 1-1/2 HP router, model number 315.175100, with wrench and carry tote; serial # A0311. In good used working condition. Come to pickup at Category A time-slot.

Rotozip spiral saw with original case. Model SCS 01 Type 2, Serial #4007. In good used working condition. Come to pickup at Category A time-slot.

Craftsman 1 HP Router model 315.17461 with partial bit caddy and template guide bushings. Black and Decker Mouse Sander model MS500 in case with sanding and polishing pads. Craftsman Dual Motion 3x8 inch Sander model 315.11631. Parker Electric stapler model TRE 300. All in working condition. Come to pickup at Category A time-slot with box to carry.

Includes two Forstner bit sets, 1/4 to 2-1/4 in and 1/4 to 7/8 in; Whitney-Jensen metal hand punch set; wood screw box; Expansion bit. All in good used condition. Located in outdoor shed. Come to pickup at Category A time-slot with box to carry.

DeWalt 10" miter saw model 7716, 10.5 amp, 120 volt, serial #61380128. In good used working condition. Come to pickup at Category A time-slot with help to carry.

Pressed wood roll- top desk with six drawers, mail sorters, and colonial style hardware measures 48Wx22Dx41H inches. In good overall condition; shows few pens marks on the desk top. Come to pickup at Category C time-slot with appropriate vehicle and help to carry.

Includes 40-piece tap and die set, large size taps, assorted sizes of hole saw blades, and 50 ft steel tape measure. All in good used condition. Come to pickup at Category A time-slot.

Campbell Hausfeld 11 gallon Air compressor has 4 HP motor, 125 maximum PSI. In working condition. Come to pickup at Category C time-slot with help to load.

Antique 9" diameter single-speed fan by Emerson Jr. In working condition with new power cord. Optional stationary or oscillating positions. Come to pickup at Category A time-slot.

Antique outdoor two burner gas stovetop measures 15Wx25Dx25H. Finish is rusting and unit needs repair. Come to pickup at Category B time-slot with help to carry.

Extended run Reddy electric start kerosene forced air heater with 55,000 BTU and 5 gallon fuel tank on small wooden creeper with castors. In working condition. Come to pickup at Category B time-slot with appropriate vehicle and help to load.

Includes Craftsman 4 amp, 115 V, 60 cycle Industrial rating vibrating sander, model 110.7602 1109 with 3.5x7 inch pad and WEN electric hand plane with blades, model 930. Both in working condition; plane cord needs to be replaced. Come to pickup at Category A time-slot.

Delta model 40-409 scroll saw on metal stand has 1/3 HP motor, some saw blades and magnetic base light. Serial number 89B10166. Measures 16Wx37Dx52H with stand. In good working condition. Shows some surface rust on table. Located in outdoor shed. Unit is very heavy. Come to pickup at Category C time-slot. Appropriate vehicle and extra help to carry is required.

Includes two 54" pipe clamps, two 40"pipe clamps, 10" bench vice with 2.5" jaw, framing clamps, and two paint mixers. All in fair used condition. Come to pickup at Category A time-slot with help to carry.

Includes two 31" pipe clamps, two 30 " bar clamps, two 24"bar clamps, two crow bars and framing clamps. Come to pickup at Category A time-slot.

Includes Craftsman belt sander model 315.117260 with sanding belts size 3x21"; Ryobi Detail Carver model DC 500, F 4283; and SKIL 1/3 HP jig saw model 4235. All in working order. Come to pickup at Category B time-slot.

Ridgid tools 1/4" variable speed, reversible drill in fairly good used working condition. Includes many assorted wood and metal drill bits: spade, twist, countersink and grinding stones; and one set of Forstner bit set. Located in outdoor shed. Come to pickup at Category A time-slot with box to carry.

Includes two antique car horns, antique cast iron decorative stove top ornament, small tin can with handle, and more. All in fairly good used condition, some with rusting seen and needing cleaning. Come to pickup at Category A time-slot.

Includes six log chains: 5 to 15 ft lengths; two ropes, eight bungee cords, two black rubber straps and one nylon strap; one come-along. All in fair to good used condition. Come to pickup at Category A time-slot.

Antique Solid Cedar Chest made by The Standard Red Cedar Company, AltaVista, VA has decorative accents on hinges and measures 35Wx19Dx13H in inches. In fair to good condition showing musty and worn exterior from garage storage. Come to pickup at Category B time-slot with appropriate vehicle and help to carry.

Shop Smith Mark V wood working multi tool has accessories for lathe, jig saw, disk sander, drum sander, dado, table saw, router with 1-1/8 HP motor. Lathe measures 62Wx20Dx43H inches. Includes many lathe chisels and saw blades and attachments. In working condition. Some rust seen on slides. Located in outdoor shed. Unit is very heavy. Come to pickup at Category C time-slot. Appropriate vehicle and help to carry is required.

Dayton Bench Top model 3Z165 sander/grinder has 1" belt sander and 8" disk sander. In working condition; however, electrical cord casing is damaged and some rust seen on table. Located in outdoor shed. Unit is heavy. Come to pickup at Category C time-slot. Extra two-person assistance to carry is required.

Homemade wooden workbench with maple top includes power strip and woodworkers vice included. (Workbench seen to left of bench is NOT included -see lot 154). Measures 52wx37Dx36H inches. Come to pickup at Category C time-slot with appropriate vehicle and help to carry.

Includes Craftsman Industrial 4.5 inch angle grinder/joiner with 1 HP motor, 10,000 RMP model 900.277230; WEN All Saw model 909 with blades; and Sears biscuit wood joiner kit, model 967230 with biscuits. All in working condition. Come to pickup at Category A time-slot with a box to carry.

Vintage white wooden bench measuring 61Wx9.5Dx16H inches. In sturdy condition with worn finish and small cracks. Come to pickup at Category A time-slot with appropriate vehicle.

Chicago Electric 3" variable speed bench grinder, model 43533, with assorted sandpaper rolls, 5 sanding blocks, scissors, rasp, and sanding sleeves. In working condition. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Large assortment of C-clamps and spring clamps in varying sizes. All in good used condition. Come to pickup at Category A time-slot with a box to carry.

Includes antique Stanley dowel maker with spare cutter blades, leather and wood punch sets, small bench vice, rasp, and the two plumb bobs. All in fairly good used condition. Come to pickup at Category A time-slot with a box to carry.

Vintage barrel measures 8" diameter x 9.5" tall and has metal plate with " Reward" inscription and wire handle. Includes five steer horns and vintage garden tool seen. In fair condition. Come to pickup at Category A time-slot.

Includes Vintage heavy shop stool with cast iron pedestal base has 13" diameter and 22" height; round table has wood top and metal base and measures 22" diameter x 20" high; small table or stool has collapsible folds up legs for storage and measures 13Wx11Dx16H inches. All in fair used condition; finish on the tables are worn, vinyl upholstered stool seat is in good condition but needs cleaning. Come to pickup at Category B time-slot with help to carry.

Large assortment of C-clamps and spring clamps in various sizes. All in good used condition. Come to pickup at Category A time-slot with a box to carry.

Includes Buffalo pneumatic air chisel with assorted chisels, pneumatic disk sander, and Cummings Central pneumatic die grinder cut off tool, model C501. Unknown working condition on pneumatic tools. Also includes manual impact driver and assorted Allen wrenches. Come to pickup at Category A time-slot with box to carry.

Includes several pieces of cedar planking, box of wood shake shingles, box of assorted diameter wood dowel rods, 5 oak cabinet doors, old yardsticks and scrap wood. Come to pickup at Category C time-slot with appropriate vehicle.

Includes 1/2" variable speed hammer drill from JC Penney; many assorted wood, metal and brad point drill bits of varying sizes; and 50 ft tape measure. In working condition; bits in fairly good used condition. Come to pickup at Category A time-slot with a box to carry.

Large assortment of C-clamps and spring clamps. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Senco pneumatic staple gun and assorted staples in fair working condition. Includes assortment of screws, bolts, nuts and nails, glue, and more. Come to pickup at Category B time-slot with boxes to carry.

Includes Craftsman Carryall metal toolbox, pipe wrench, oil can, Sargent metal door plate, 1/2" wooden dowel rods, and more. All in fairly good use condition; pipe wrench shows rusting. Come to pickup at Category A time-slot with boxes to carry.

Assortment of hand tools including hammers, 3/8" socket set, large bolt cutters, Allen wrenches and more. All in fair used condition. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Includes one two-man crosscut logging saw 75 inches long (missing one handle) and a one 1-man logging saw 46.5 inches long. Both blades show rusting. Come to pickup at Category A time-slot.

Includes Sears Dowling Jig, Ratchet driver set, drill bits, 1/2 deep sockets, Black and Decker right angle drill chuck, and punches. All in fair to good used condition. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Black and Decker Super Duty belt sander with two speeds and 3x24 inch belt size. Catalog no. 840. Sanding belts included. In working condition. Come to pickup at Category B time-slot.

Includes one galvanized wash tub which measures 18Wx19Dx11H inches in fairly good condition showing dents on bottom edges and paint splatter and three 5-gallon plastic buckets. Come to pickup at Category A time-slot.

Aluminum 14 foot extension ladder in fairly good used condition with few some dents.. Come to pickup at Category C time-slot with appropriate vehicle.

Assorted air tools and hoses including Central Pneumatic 1/2 in impact wrench, paint sprayer and air powered caulk gun. Come to pickup at Category A time-slot.

Multi-piece lot of yard tools including post hole digger, potato fork, bulb planter, spade, two hack saws, maul, small hand tools and more. All in fairly good used condition; wheelbarrow has flat tire and rusted through around edges. Come to pickup at Category B time-slot with help to carry.

Large assortment of hand tools, saw blades, two electric motors, saw horse brackets, propane torch and other assorted grab bag tools. Located in outdoor shed. Come to pickup at Category A time-slot. Bring multiple boxes and help to carry.

Includes metric socket set, 1/4" socket set, hand saws, hacksaw and blades, letter and number stamp set, and variety of hand tools. All in fair used condition. Come to pickup at Category A time-slot with a box to carry.

Assortment of used motors of various HP and size, untested. Come to pickup at Category B time-slot. Very heavy, bring help to carry required.

Wen 7", 2-speed disk sander with assorted sanding disks. In working condition, but cord needs repair (missing ground plug). Includes assorted hand tools seen. Come to pickup at Category A time-slot.

Includes Craftsman 3.5x21" belt sander, model 315.117260 with several 3X21 inch belts; Ryobi Detail Carver, model DC 500; Chicago electric 4" angle grinder, model 01711; and set of center punches. All in working condition; grinder has a bad cord. Located in outdoor shed. Come to pickup at Category B time-slot with a box to carry.

Whirlpool 12000 BTU window air conditioner, model ACM 122XJ0. Fan runs and appears to cool. Measures 40wx24Dx16H inches overall with extension. Unit is very heavy. Per seller -110V and plugs into a standard 110V outlet.  Come to pickup at Category B time-slot with extra help to carry.

Includes two metal tool boxes with some hand tools: Box wrenches, screwdrivers, hammer, channel locks, C-clamp and wire cutters; Crow lumber carpenter pouch and 16 like new joist braces. Come to pickup at Category A time-slot.

Includes DieHard 12-volt battery charger (untested); hydraulic floor jack, tire iron, oil pan and more. Come to pickup at Category B time-slot with help to carry.

Includes a Thompson Cabinet Company printer's drawer and a Queen City Dairy milk crate; handmade roadrunner yard ornament is also included. The crate measures 16Wx12.5Dx10H in inches. The drawer measures 32Wx16.5H. Al in good used condition. Come to pickup at Category A time-slot.

Includes GE model 3-5505F AC/battery operated 8- track tape player in good working condition and box full of 8- track tapes from the 1970's and four record albums. The player is in working good condition; tapes in fair to good condition, some crackle in audio.

Includes one wooden Dunco Bottle Case measuring 18W x11.75Dx10H inches; smaller wooden crate size 12Wx7.5Dx5.5H inches; corn knife, 6.5 in cast iron skillet, 6 in metal pail, vintage yard sticks, and 12.5 x 24 in piece of slate. Come to pickup at Category B time-slot.

Vintage Wooden bench measures 58Wx10Dx16.5H inches. In sturdy condition showing wood is split in seat. Come to pickup at Category A time-slot with appropriate vehicle.

Includes one hobnail pedestal candy dish, one tabletop fish bowl, one water pitcher, a variety of clear glass flower vases and more. All in fair condition with no cracks or breaks; all need cleaning. Come to pickup at Category B time-slot with proper containers and packing material.

Includes variety of carpentry magazines such as "Workbench" and "Handyman" and wood carving magazines such as "Fine Wood Working" and "Chip Chats", and more. Magazines are in fair condition; musty from garage storage. Also includes several drawing books. Come to pickup at Category A time-slot with boxes to carry.

Includes two shadow boxes for miniatures, one wood, one metal and glass. Two collector plates from destinations, sewing scissors, ladies vanity brush, and more. Ceramic house votive holder NOT included. Come to pickup at Category A time-slot with boxes and packing material.

Cast iron drill press base with 3-1/2 in vise attached to top. Also has height-adjustable platform with mini workmate attached and attached electrical box but cord needs replacing. Measures 20Wx32Dx40H inches. Unit is very heavy. Located in outdoor shed. Come to pickup at Category C time-slot. Extra help is required to carry.

Diverse assortment of hand tools including files, socket sets, screw drivers, pliers and more. All in fair used condition. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Assortment of hand tools including tin snips, screw drivers, crescent wrenches, Allen wrenches, box wrenches, file, tape measures and more. All in fair used condition. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Includes 4 hand saws, 2 framing squares, adjustable framing clamps, pipe clamps, 1 antique butcher shop saw. All in fair used condition. Located in outdoor shed. Come to pickup at Category A time-slot.

Makita 5" orbital finishing sander model B05010. In working condition. Includes Allen wrench set, wood scraper and Burnisher, various clamps and hand tools (piece missing on hacksaw). Come to pickup at Category A time-slot with box to carry..

Large assortment of screws, washers, bolts and nuts, nails, nylon strapping with clips and more. Come to pickup at Category A time-slot with boxes to carry.

Vintage oak rocker has spindle back with carved design and caned seat. Measures 17.5Wx30Dx40H inches. In good used condition showing scuffs from normal wear. Come to pickup at Category B time-slot.

Includes two picket fence wood planters and a variety of baskets. In fair to good condition; few of the smaller picket fence planter posts are loose and one side of hexagon planter is separated. Come to pickup at Category B time-slot with box to carry.

Votive Holders each have wood lid and hand painted scenes that give a 3D effect when illuminated. Each measures 6Wx6Dx9H in inches. In good condition; need cleaning. Come to pickup at Category A time-slot.

Dirt Devil Plus hand vac model no. 08130 and Electrolux Little Lux II hand vacs model no. L118A in working condition. Also includes three-prong extension cord and magnetic trouble light, snow scrapers and NAPA air filter 6126 never used. Come to pickup at Category A time-slot with box to carry.

Craftsman industrial rated 3/8" variable speed, reversible electric drill with drill guide. Includes s several bits (including long bits) and 1/4" nut driver set. In working condition; cord needs repair. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Various measuring tools including tape measures, wood and metal straight edges, calipers, adjustable square, and more. All in fair to good condition. Come to pickup at Category A time-slot with a box to carry.

Black and Decker professional 7.25" Sawcat circular saw, model 3030, serial no. 33958. In working condition, but has frayed cord. Includes 48" metal level seen. Come to pickup at Category A time-slot.

Weedeater FeatherLite model FL 20C, 15 inch cut weed trimmer has 20 cc engine, extra Echo SRM blade kit and replacement spool. Serial number 10123N501889 4. In good condition. Come to pickup at Category A time-slot.

Solid wood rocker has spindle back and measures 16.5Wx23Dx33H inches. In good sturdy condition. Come to pickup at Category B time-slot.

Handmade, rough cut crate measures 19Wx15Dx14H inches. Also includes an assortment of wood craft cut outs and parts seen. In fair to good condition; most need cleaning. Come to pickup at Category B time-slot.

Includes handmade Chinese checker board, iron horse shoes, tic tac toe, mini badminton rackets, baton, model rocket, View Master projector, and dart board. Darts are not included. In fair condition. Come to pickup at Category B time-slot with boxes to carry.

Published by MacMillan Co. in May 1901, Illustrated by Howard Chandler Christy. In fair to good condition, shows yellowed pages, faded cover, and handwritten family gift message. The binding is in good condition. Come to pickup at Category A time-slot.

Variety of electrical parts including wire spades and crimping tool, fasteners, clip lights, door chime, glass insulators, level and more. Located in outdoor shed. Come to pickup at Category A time-slot with a box to carry.

Includes several hand saws, Rigid propane torch, Black & Decker precision detailing tool, multi-cut hole cutter, chainsaw sharpener, and more. All in fair condition, showing rust on saws Located in outdoor shed. Come to pickup at Category A time-slot with box to carry.

Includes fiber rope cut to three various lengths and one cotton rope; one complete steel Logger chain and one approximate 18" length of steel link chain. All in used condition; cotton rope shows fraying. Come to pickup at Category A time-slot.

Remington 16" electric chain saw and extra chains. In working condition. Come to pickup at Category B time-slot.

Includes Black and Decker Workmate bench, two bar stools, one kitchen step stool, large magnet, and Halogen clamping work light, and live trap measuring 32Wx11Dx11H inches. All in heavily worn and soiled condition needing cleaning. Come to pickup at Category A time-slot with help to carry.

DeWalt model 7790 contractor's radial arm saw has 3-1/2 HP dual voltage motor believed to be set up for 220v currently. Includes DeWalt stand and homemade sawdust bin with attached woodworkers vise. Miter vise seen included along with two blades. Measures 40Wx38Dx54H inches overall. In used working condition. (Attached workbench is NOT included, see Lot 185). Unit is very heavy. Located in outdoor shed. Come to pickup at Category C time-slot. Appropriate vehicle and help to carry is required.

John Oster 1.5" drill, model 333. In working condition, but cord needs repair. Rockwell 7" Disk Sander, model 304. In working condition, but cords need repair. Includes drill bits and mini punch set seen. Come to pickup at Category B time-slot with box to carry.

Three Gas Cans of multiple sizes: Two heavy gauge 2 gallon cans and small can with safety gauge. Fair to good condition; however may not meet current safety requirements. Come to pickup at Category A time-slot.

Includes one 2.5 gallon gas can and one small gas can; full or partially used assorted motor oils; two grease tubes and container of turpentine; one container of bar and chain oil. Gas Cans in poor to fair condition; may not meet current safety standards. Come to pickup at Category A time-slot with boxes to carry.

Two-step aluminum step stool, NAPA grease gun, ladder shoes and assorted mounting bracket hardware. All in fair to good condition. Come to pickup at Category A time-slot with box to carry.


Please wait...